Serving the Ottawa Valley
From Renfrew to Deep River
Pembroke, Eganville, and Petawawa.
If you experience any trouble with your system, you may always call us for help and service. But here are a few simple solutions you can attempt before calling one of our service technicians to your home for a service visit.
Check to make sure that your thermostat is set in the "cool" position.
Check the outdoor unit "disconnect switch" to make sure it is in the "ON" position. The disconnect switch is located near the outdoor unit. (Typically a grey 8" wide x 16" high x 4" deep box mounted to the wall).
If not, check to make sure the on / off switch at the furnace is in the "ON" position
Your filter should be changed every month.
Check to make sure that your thermostat is set in the "heat" position.
(This tells your heating system that it should provide heat!)
Try turning the fan to "ON" using the fan switch on the thermostat to test for power to furnace.
Check the circuit breakers at the electrical panel to make sure they are in the "On" position.
Check the SSU switch (it looks like a light switch on a gray box located at the furnace) to be sure it is in the "ON" position.
Purolator 2-inch thick, and other high-capacity pleated filters can most likely be changed every other month or just 6 times per year.
If the system is running but you have not changed your filter, the filter may need to be replaced.
If these simple solutions do not solve your problem, contact Temp-Tech Refrigeration, Heating & Cooling Ltd. for service. Be sure to have your brand and model number handy.
Copyright Temp-Tech 2016